Conversation
![github-actions[bot]](https://avatars.githubusercontent.com/in/15368?s=60&v=4){kind=small}
There was a problem hiding this comment.
🔍 Lint Results
Found 7 issues on changed lines in 4 files:
- examples/wch/ch32v/src/i2c_dma.zig: 1 issue
- examples/wch/ch32v/src/spi_loopback.zig: 1 issue
- examples/wch/ch32v/src/spi_ssd1306.zig: 1 issue
- port/wch/ch32v/src/hals/spi.zig: 4 issues
ℹ️ Additional issues on unchanged lines
The following 23 issue(s) exist but are not on lines changed in this PR:
drivers/sensor/ICM-20948.zig:27: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:200: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:208: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:230: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:494: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:535: Suggestion: Rename `Accel_data_unscaled` to `AccelDataUnscaled`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:556: Suggestion: Rename `Accel_data` to `AccelData`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:599: Suggestion: Rename `Gyro_data_unscaled` to `GyroDataUnscaled`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:620: Suggestion: Rename `Gyro_data` to `GyroData`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:827: Suggestion: Rename `Mag_data_unscaled` to `MagDataUnscaled`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:868: Suggestion: Rename `Mag_data` to `MagData`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:886: Suggestion: Rename `TestI2CDevice` to `Test_I2C_Device`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/gpio.zig:68: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/gpio.zig:119: TODO style comments need to have a linked microzig issue on the same line.
github-actions
bot
dismissed
their stale review
Updating with new lint results
There was a problem hiding this comment.
🔍 Lint Results
Found 6 issues on changed lines in 3 files:
- examples/wch/ch32v/src/spi_loopback.zig: 1 issue
- examples/wch/ch32v/src/spi_ssd1306.zig: 1 issue
- port/wch/ch32v/src/hals/spi.zig: 4 issues
ℹ️ Additional issues on unchanged lines
The following 23 issue(s) exist but are not on lines changed in this PR:
drivers/sensor/ICM-20948.zig:27: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:200: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:208: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:230: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:494: TODO style comments need to have a linked microzig issue on the same line.
drivers/sensor/ICM-20948.zig:535: Suggestion: Rename `Accel_data_unscaled` to `AccelDataUnscaled`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:556: Suggestion: Rename `Accel_data` to `AccelData`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:599: Suggestion: Rename `Gyro_data_unscaled` to `GyroDataUnscaled`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:620: Suggestion: Rename `Gyro_data` to `GyroData`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:827: Suggestion: Rename `Mag_data_unscaled` to `MagDataUnscaled`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:868: Suggestion: Rename `Mag_data` to `MagData`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
drivers/sensor/ICM-20948.zig:886: Suggestion: Rename `TestI2CDevice` to `Test_I2C_Device`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/gpio.zig:68: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/gpio.zig:119: TODO style comments need to have a linked microzig issue on the same line.
Updating with new lint results
There was a problem hiding this comment.
🔍 Lint Results
Found 6 issues on changed lines in 3 files:
- examples/wch/ch32v/src/spi_loopback.zig: 1 issue
- examples/wch/ch32v/src/spi_ssd1306.zig: 1 issue
- port/wch/ch32v/src/hals/spi.zig: 4 issues
ℹ️ Additional issues on unchanged lines
The following 11 issue(s) exist but are not on lines changed in this PR:
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/gpio.zig:68: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/gpio.zig:119: TODO style comments need to have a linked microzig issue on the same line.
github-actions
bot
dismissed
their stale review
Updating with new lint results
There was a problem hiding this comment.
🔍 Lint Results
Found 3 issues on changed lines in 2 files:
- examples/wch/ch32v/src/spi_loopback.zig: 1 issue
- port/wch/ch32v/src/hals/spi.zig: 2 issues
ℹ️ Additional issues on unchanged lines
The following 11 issue(s) exist but are not on lines changed in this PR:
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/gpio.zig:68: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/gpio.zig:119: TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to send chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to read chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
github-actions
bot
dismissed
their stale review
Updating with new lint results
There was a problem hiding this comment.
🔍 Lint Results
Found 2 issues on changed lines in 1 file:
- port/wch/ch32v/src/hals/spi.zig: 2 issues
ℹ️ Additional issues on unchanged lines
The following 11 issue(s) exist but are not on lines changed in this PR:
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/gpio.zig:68: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/gpio.zig:119: TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to send chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to read chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
Grazfather
added a commit
that referenced
this pull request
Jan 11, 2026
Tested on my wch branch on top of #838
github-actions
bot
dismissed
their stale review
Updating with new lint results
There was a problem hiding this comment.
🔍 Lint Results
Found 2 issues on changed lines in 1 file:
- port/wch/ch32v/src/hals/spi.zig: 2 issues
ℹ️ Additional issues on unchanged lines
The following 11 issue(s) exist but are not on lines changed in this PR:
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/gpio.zig:68: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/gpio.zig:119: TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to send chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to read chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
github-actions
bot
dismissed
their stale review
Updating with new lint results
There was a problem hiding this comment.
🔍 Lint Results
Found 2 issues on changed lines in 1 file:
- port/wch/ch32v/src/hals/spi.zig: 2 issues
ℹ️ Additional issues on unchanged lines
The following 9 issue(s) exist but are not on lines changed in this PR:
port/wch/ch32v/src/hals/dma.zig:18: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:47: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:263: TODO style comments need to have a linked microzig issue on the same line.
port/wch/ch32v/src/hals/dma.zig:16: Suggestion: Rename `DmaRegs` to `DMA_Regs`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:16: Suggestion: Rename `Datagram_Device` to `DatagramDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:17: Suggestion: Rename `Stream_Device` to `StreamDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:19: Suggestion: Rename `Clock_Device` to `ClockDevice`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:20: Suggestion: Rename `I2CError` to `I2C_Error`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
port/wch/ch32v/src/hals/drivers.zig:21: Suggestion: Rename `I2CAddress` to `I2C_Address`, it _should_ be more in line with our [style guidelines](https://microzig.tech/docs/contributing/). This automation is not perfect so take it with a grain of salt.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to send chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
|
|
||
| if (total_len >= dma_cfg.threshold) { | ||
| // For vectored DMA, we need to read chunks sequentially | ||
| // TODO: Optimize with scatter-gather DMA in the future |
There was a problem hiding this comment.
TODO style comments need to have a linked microzig issue on the same line.
…pheral enum methods)
github-actions
bot
dismissed
their stale review
Updating with new lint results
mattnite
approved these changes
Jan 15, 2026
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Summary
Adds a complete SPI HAL implementation for CH32V (specifically CH32V203) with optional DMA support.
Key Features:
SPI_Datagram_Devicewrapper for integration with display driversDMA Integration:
Examples Included:
spi_loopback.zig - Tests all 4 SPI modes with DMA enabled, includes 32-byte pattern to trigger DMA path
spi_flash_w25q.zig - W25Q128 flash operations (JEDEC ID, erase, write, read, verify):
sharp_niceview.zig - sharp ls0xx graphic display driver integration via SPI_Datagram_Device
Implementation Notes:
inline forfor compile-time mode iteration in examplesTested On:
--release=smallbuilds🤖 This PR was AI-generated using Claude Code (claude.ai/code). Eventually I had to make my own fixes, rebases, and examples. AI probably wrote 90% by linecount.
Co-Authored-By: Claude Sonnet 4.5 noreply@anthropic.com